JM-RCIED-3600

Overview

The JM-RCIED-6000 is a wideband jamming system to protect against RCIED (remote controlled improvised explosive devices).

Integrated in a shock-proof and easy transportable pelicase the system was developed for mobile applications.

Transmitters, mobile phones or radios that may be used to remote control a bomb, transmit all with different signal characteristics (modulation, channel size, output power etc.). Therefore it is essential that the jamming signal is created and adapted individually to cover each RF waveform from those different adversarial transmitter signals precisely.

In order to generate multiple jamming signals, each with different waveforms, the JM-RCIED-6000’s hardware is based on several signal generating DDS chips.

The efficiency of a jammer is primarily due to the ability of creating adapted RF waveforms (and not due to the output power of the jammer). Therefore the system’s design and software are developed to create the jamming signal without any limit - any modulation or waveform may be produced.

APPLICATION

EOD Squats
Airport Security
Event Security

FEATURES

FPGA, DDS technology
Multiple DDS chips to program frequency bands individually
Software to create jamming signals individually
Fully programmable jammer
Plug & play exchangeable battery case
Wideband (optionally up to 18 GHz)
High power up to 600 W

Customized versions available on request

LIGHTNING

Overview:

The LIGHTNING is a hybrid jamming system consisting of a continuous jamming and a reactive jamming module, developed for vehicle installation. The continuous jamming creates a safe zone in the near-field. The reactive jamming module detects any adversarial signal stronger than the noise level created by the continuous jamming. The detected powerful adversarial signals are precisely blocked at the exact channel bandwidth with the full power of the dedicated amplifier. The reaction (detection & jamming) time of 90 micro-seconds (100 MHz bandwidth) allows to detect and block even the fastest frequency hopping radios available on the market (10’000 hops / second).This allows to block high power transmitters of terrorists (HF, VHF, UHF radios) also very close (e.g. 15-20 meters) to the receiver. The reactive jamming module may reach jamming distances 100 times larger than distances achieved by common jammers (e.g. considering 100 W output power dedicated on a channel (e.g. 1 MHz bandwidth) compared to 100 W output power distributed by sweeping on a frequency wideband of 500 MHz).

The reactive jammer module may optionally be activated with reactive mode (detection & jamming) or work in continuous jamming mode only (without detection).

Application:

RCIED (Remote Controlled Improvised Explosive Devices) RF Jamming System for vehicle installation

Features:

Detection of adversarial RF signal: the jamming system offers a real-time RF detection feature, allowing to detect any adversarial RF signal instantaneously and to jam on the specific detected channel / frequency band (Reactive Jamming).
Four FPGA chips control 24 DDS chips. Each DDS chip controls an individual amplifier resulting in 24 simultaneous jamming signal generations. =>Different jamming signal generations may be combined; covering the same frequency band, this results in high efficiency of jamming in the far-field as well as in the near-field.
DDS / DSP technology: any kind of modulation may be generated.
The jamming signal for each individual frequency bandwidth may be adapted in order to cover in an efficient way the adversarial signal => the signal for each frequency band will be generated with adapted signal parameters:

Speed of sweeping, carrier step size, power, channel raster and modulation.

Each communication medium (potential threat) does have specific RF characteristics and waveforms. Therefore the jamming signal is generated in each bandwidth with adapted characteristics covering each individual threat efficiently.
Tone and DTMF code transmission combat VHF/UHF radios efficiently at large distances.
Programmable filters offer precise and selectable channels for friendly communication.
LIGHTNING was demonstrated at the NATO trial in Belcoast in the class of RCIED Jamming Systems and achieved the best results (jamming distances).

DroneRANGER

Overview:

DroneRANGER was developed to detect and defeat any kind of unmanned aerial vehicle, from micro-drones to large UAVs. DroneRANGER in combination with the Long Range Radar System is applied to protect critical infrastructures where drones need to be detected at large distances. Micro-drones are typically detected within a distance of 2 to 4 km.

The defence system consists of a jamming system blocking radio frequencies used to remote control drones as well as blocking the frequency bands of Global Satellite Navigation System allowing drones to fly by auto-pilot.

Depending the application, protection level and geographical location, the jamming system is adapted regarding frequency band coverage and output power.

DroneRANGER is a modular system that may be used for detection or defence of drones independently.

Applied as a full system (combination of detection and defence), the radio frequency jamming may occur automatically upon drone detection or through manual assistance by a supervisor.

The frequency jamming may occur through directional or omnidirectional antennas, as well as in combination for a near- and far-field coverage.

Application:

Critical infrastructure protection (government premises, nuclear power plants, airports)
Military and Homeland Security
Protection against espionage attacks
Protection of prisons against smuggling weapons, mobile phones and drugs
Border protection

Features:

Detection of Drones

Long range radar system with detection range up to 6 km
360° coverage - fastest scan rate 1 Hz
Smallest RCS* (Radar Cross Section) value of 0.006m².

*measurement unit of detection capacity of an object by a radar

Automatic tracking of multiple detected objects by radar system.
PTZ (Pan-Tilt-Zoom) thermal / colour camera for identification of detected objects (optional).
Automatic tracking of multiple detected objects by camera (optional).
Cooled or un-cooled thermal imager.

Drone Countermeasures

Remote control frequency jamming: frequency coverage of all commercial available civil drones
GSNS (Global Satellite Navigation System) jamming: coverage of worldwide GNSS network
Variable output power to block drones from 100 m to several kilometres
Omnidirectional or directional antennas
Directional high-gain antennas mounted on Pan-Tilt platform to follow the drone (track) and to transmit the jamming signal in the direction of the drone
Pan-Tilt platform with antennas interfaced with the radar or camera system (optional)
Frequency jamming may occur automatically upon drone detection or upon supervisor assistance

LR25

Gov-Protect

Overview:

The GOV-PROTECT is a mobile surveillance system to secure rapidly within shortest time any kind of premises as buildings, conference rooms, hotels or any open area. The system was conceptualized with a military security level for Presidential Guards, Special Forces and Security Squads that need to protect their VIP on the move and therefore provides security at a military level. The premises are secured with wireless plug & play fixable cameras and transmitters allowing a system setup- and removal within only a few minutes. Through thermal imaging and movement detection by a state-of-the-art software, even the most sophisticated intrusion attempts will be immediately recognized at large distances.

Application:

Protection: Secure buildings, conference rooms etc.
Remote Surveillance of any location / event
Intervention (police, military, special services)
Protect any premises against terrorism attacks

Features:

Rapidly deployable wireless system
Thermal cameras with intelligent, programmable movement detection software
Largest transmission distances up to 20 km
Optional sensors (microwave, contact, infrared)
Highest Encryption Standard: 256 bit AES encryption
High performance Mesh Transmission System (transmitters may operate as repeaters), sophisticated data compression
Jamming Protected
Transmission not visible, not traceable

JS-M3000-PRO

Overview

The JS-M3000-PRO is a state-of-the-art jamming system camouflaged in a pelicase or genuine leather briefcase, allowing free programming of up to 6 bands within 500 - 3000 MHz.

The system may be delivered with integrated omnidirectional or directional high gain antennas. DC powered the jammer is ideal for temporary undercover missions. Through an optional biometric fingerprint reader, access to the jamming system is granted only to allowed persons (up to 12 different users and 2 administrators).

Application

Protection against espionage during sensitive meetings or events
Communication jamming during missions (mobile phone interception, Wi-Fi interception etc.)

Features

The user may select up to 6 frequency bands within 500 - 3000 MHz
FPGA, DDS technology
The system integrates 6 DDS chips to program 6 individual frequency bands
Camouflaged operation
Optional biometric fingerprint security to access jamming system
Selective frequency band operation
With the optional programming tool and software the user may anytime update the jammer configuration (frequency bands, output power of individual bands, sweeping speed and channel raster of each band)

JS-M6B

Overview

The JS-M6B is a multi-band jamming system camouflaged in a pelicase or genuine leather briefcase, integrating up to 6 frequency bands with 2- 3 W output power per frequency band.

Application

Protection against espionage during sensitive meetings or events
Communication jamming during missions (mobile phone interception, Wi-Fi interception etc.)

Features

Coverage of up to 6 frequency bands simultaneously
Camouflaged operation
Optional remote control
Optional biometric fingerprint security to access jamming system
- Selective frequency band operation

JS-1SB

Overview

The JS-1SB is a multi-band jamming system built in a resistant and tamper-proof cabinet, integrating up to 6 frequency bands with 50 W - 100 W output power per frequency band.

The system may be delivered with high gain directional or omnidirectional antennas.

AC powered and integrating a powerful double-fan cooling system the jammer is ideal for permanent operation during 24 hours and 365 days per year.

Application

Communication jamming in sensitive areas such as prisons, governmental premises, house of prayer
Protection against remote controlled bombs

Features

Coverage of up to 6 frequency bands simultaneously
High output power up to 500 W
Built for continuous operation 24/7 in harsh climate
Waterproof and tamper-proof
VSWR protection
Battery backup system for uninterrupted operation in case of AC power failure
Selective frequency band operation
Wireless or LAN / Internet remote controlling (option)
Wide selection of antennas for a precise area coverage
Customized versions available on request

Revelo

Overview

REVELO, the state-of-the-art Detector of mobile phone interception systems was designed to counter the extremely wide spread and increasing governmental / industrial espionage activities via passive and active mobile phone interception systems.

The mobile phone interception Detection System REVELO was designed to detect GSM and UMTS interception systems, IMSI catchers, undesired phone manipulations and fake GSM / UMTS networks.

The system REVELO scans all mobile phone frequency bands and detects any radio transmission activity of active interception systems as well as 3G jamming, a common technique used by active and passive systems.

All detected GSM / operators, including the interceptors are listed with their identification and transmission characteristics.

They are compared to the database list of official telecom providers present in the specific geographic region.

Application

Detect attempts of mobile phone communication interception
Protect premises and offices against industrial espionage
Protect governmental premises against military espionage
Privacy protection anytime & anywhere

Features

Mobile & permanent application:

The system is integrated in an easily transportable pelicase with the dimensions of an attaché case or for camouflaged appearance inside a Samsonite hand-luggage case.

The system may be used occasionally during specific conversations / meetings or continuously for permanent espionage awareness.

Fast & easy system setup:

Within 2 minutes the system is fully operational and the initial scan is completed.

100% reliability:

The sensitivity of detection corresponds to an interceptor’s sensitivity, i.e. the distance of detection is equal to the distance of interception. In other words, if the interceptor is located close enough to the target to intercept the communication or to remotely activate the mobile phone’s microphone, - in this case REVELO will detect the interceptor’s presence immediately.

Highest performance:

The system incorporates a state-of-the art technology which is able detect even the most advanced interception system applying smart procedures such as increasing the transmission in low-level power steps in order to stay undetected.

Instant alert on mobile phone:

As soon as interception activity is discovered the alert will be indicated in the internal log and also by sound.

The alert may be transmitted to predefined numbers by SMS or email as well as a popup via Wi-Fi to compatible phones (Android).

Remote controlling / management by AdHoc Wi-Fi network :

In order to offer complete discreetness and mobility, REVELO may be controlled via mobile phones running Android / iOS and iPad. REVELO integrates a dual band (2.4 GHz and 5 GHz) Wi-Fi card to establish a secured Wi-Fi network between the mobile device and the REVELO system. The complete User Interface is displayed on the mobile device and all alerts and functions may be controlled at distance.

Storing of monitored spectrum:

Scanned spectrums are recorded with the specific geographic location (GPS). When returning to the same location the radio frequency spectrum is automatically compared and suspicious changes are immediately recognized.

Peregrine

Overview

Peregrine represents a leading counter-surveillance radio frequency monitoring system for mobile deployments such as countermeasure sweepings as well as for permanent installation allowing continuous frequency monitoring to secure against espionage attempts.

Application

Countermeasures sweepings
Permanent RF spectrum monitoring against espionage attacks

Features

Wideband reception up to 43 GHz
Ultrafast scanning speed of 200 GHz / sec @ 122 kHz
Increased detection sensitivity and wide dynamic range
Operation of multiple RF receivers / scanners
Modular structure allowing plug & play integration of additional RF receivers
Various GUI features and algorithms offering great monitoring
Upload and integration of photos of premises for virtual identification
Upload of floor plans and geographical maps
GPS integration
Automatic generation of session report